| SPECIFICATIONS |
|
Frequency |
|
Frequency Range: |
0.2Hz to 20MHz in 8 overlapping decade ranges with fine adjustment by a vernier. |
|
Vernier Range: |
>10:1 on each range. |
|
Vernier Accuracy: |
Typically ?% of full scale. |
|
Sweep Mode External |
|
Input Impedance: |
82 kW |
|
Sweep Range: |
Typically > 20:1 |
|
Input Sensitivity: |
Typically 0 to 2V for 10:1 sweep |
|
Max. Input Voltage: |
?0V |
|
Max. Slew Rate of sweep voltage: |
0.1V/us |
|
Operating Modes |
|
(Specifications apply for the top decade of each frequency range and output 10V peak-to-peak into 50W termination). |
|
Sine |
|
Distortion: |
Typically 2% on 200, 2k and 20k ranges. |
|
Amplitude Flatness: |
?.2dB to 200kHz; ?dB to 20MHz. |
|
Triangle |
|
Linearity: |
Typically 99% on kHz ranges. |
|
Squarewave |
|
Rise and Fall Times: |
<22ns |
|
DC Range: |
?0V from 50W |
|
Symettry |
|
Symmetry Range: |
Typically variable from 1:6 to 6:1 up to 500kHz. |
|
Outputs |
|
50 Ohms |
|
Three switch-selectable ranges with 26dB vernier control within each range. |
|
0dB Range: |
1V to 20V peak-to-peak (0.5V to 10V into 50W). |
|
-20dB Range: |
100mV to 2V peak-to-peak (50mV to 1V into 50W) |
|
-40dB Range: |
10mV to 0.2V peak-to-peak (5mV to 0.1V into 50W) |
|
DC Offset Range: |
?0V from 50 W. DC offset plus signal peak limited to ?0V (?V into 50W). DC offset plus waveform attenuated proportionally in -20dB and -40dB position. |
|
TTL/CMOS |
|
Capable of driving 4 standard TTL loads. |
|
General |
|
Power: |
230V or 115V nominal 50/60Hz, adjustable internally; operating range ?4% of nominal; 30VA max. Installation Category II. |
|
Operating Range: |
+5oC to + 40oC, 20% to 80% RH. |
|
Storage Range: |
-10oC to +65oC |
|
Environmental: |
Indoor use at altitudes to 2000m, Pollution Degree 1. |
|
Electrical Safety: |
Complies with EN61010-1. |
|
EMC: |
Complies with EN55011 and EN50082-1. |
|
Size: |
220(W) x 82(H) x 230(D) mm, (10.3 x 3.4 x 9.2") excluding feet. |
|
Weight: |
1.5 Kg (3.3lb). |