|
PA106A Power Analyser
Three Phase Wattmeter - Three Phase Power analyser products
The Powertek PA106A high performance Power Analysers are available as single and three phase instruments. The PA106A is designed to cope with the extreme signals generated on frequency inverter drivers and other power electronic generated signals. Regardless of the signal waveforms, the analysers will always provide precise and reliable measurements. A bright monitor display lets you read the display values from a distance of up to 4m, interfaces allow capture of all results to a PC.
* Accurate with all waveshapes
* Suitable for PWM frequency inverter drives
* Large graphical display
* Waveform display, Bar Charts, Harmonics 1-99
* DC-1MHz, 1.5 mA-40 A, 0.3 V-1000 V autoranging protected inputs
* 0.1 % and 0.05 % accuracy options
* IEEE-488, RS232 with Windows sofware
* Measures 3 phase totals for Watts, VA VAr, Power factor, Vrms, Vpk, Arms, Apk and freq - for unbalanced loads
* Use for DC, single and three phase systems
* Easy connection to load under test
* Input for external current probe / clamp current transformers
* Optional wideband zero phase shift current probes
* 120Vac or 230Vac powered
Single phase and three phase power analysing wattmeters allow simultaneous capture of many electrical measurements during testing. Using one set of V and A connections, an impressive list of measurements can be saved in seconds. Three phase power analysing wattmeters are important when accurate watts measurement is necessary for certification and traceability. In addition to active power (watts), reactive power (VAr), apparent power (VA), voltage rms (Vrms), current rms (Arms), power factor (PF), can all be viewed at the same time. All Powertek wattmeters simply connect between the ac supply and the load, various current probes and shunt options allow measurement with all levels of current amplitude. Typical three phase wattmeter applications include appliance testing like standby power compliance (Energystar), motors, generators, electric stoves, heating, air conditioning, pumps, fans, electronic lighting and variable frequency motor controllers . All our power analysers are equipped with safety terminals (4mm/banana) along with optional "breakout" boxes and clamp probes for fast and safe measurement.
PA106A-1/0.1 Single Phase Power Analyser, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.
PA106A-1/0.05 Single Phase Power Analyser 0.05% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.
PA106A-1/nh Single Phase Power Analyser, without harmonics, without graphics, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.
PA106A-3/0.1 Three Phase Power Analyser, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.
PA106A-3/0.05 Three Phase Power Analyser 0.05% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input. (add “T” for transformer testing. Power accuracy at power factor 0.005: 0.005% range + 1 % reading
PA106A-3/nh Three Phase Power Analyser, without harmonics, without graphics, 0.1% accuracy, setup memory, 0.3-1000V, 1mA-30A, shunt input.
Options
Option 01 RS-232 Interface and Centronics printer output inc. Windows Operating Software (95, 98, NT, 2000, ME, XP) to control, read, and store data
Option 02 RS-232- and IEEE-488 Interface, Centronics printer output inc. Windows Operating Software (95, 98, NT, 2000, ME, XP) to control,
read, and store data printer output
Option 03 RS-232- and IEEE-488 Interface, Centronics printer output, and 4 programmable analog outputs, 8 analog inputs including Windows Operating Software (95, 98, NT, 2000, ME, XP) to control, read, and store data, read analog inputs
Option 04 3-Phase current sensor module 0-100A (0-200A), (excitation supply from 106A)
Option 06 106A driver for Nat. Instrument LabView
Option 07/M Software for Motor Testing
Option 07/T Software for Transformer Testing
Option 08 TTL-input for external synchronization
Option 09 Network to form artificial neutral (mainly frequency inverter measurements)
Option 10 0-300A, 0-3000A flexible current clamps with connector to clamp input of Power Analyser (1 per phase). 1% 50/60Hz
Accessories
ACS 3: Soft carrying case for 106A
ACS 4: Set of test leads, max. 32A, 1.5m (2 red, 2 black)
ACS 5: Shunt input connector
ACS 6: Service Manual 106A
ACS 7: Rack Mounting Kit
ACS 8: Calibration Certificate from Accredited Laboratory UKAS (UK NPL) or A2LA (NIST USA)
ACS 10: RS-232 / USB Adapter cable
Warranty on all items 2 years
|
|
|
|
|